Gen IV LS Rectangle Port Hellcat Supercharger Adapter Pre-Order

This is a set of adapter plates to bolt a hellcat supercharger onto a Gen IV LS based GM engine with rectangle port heads. This will NOT fit on a Gen V LT Based engine. This also will NOT fit on a gen III/IV with cathedral port heads. This kit uses Gen V LT intake seals on the both sides of the adapter.

The Kit includes

• 2 adapter plates.
• 10 bolts to attach the adapter plates to the engine
• 2 sets of 8x LT seals to seal the adapters to the supercharger and the adapters to the heads.

Things needed that the kit does not include

• Correct pulley to line up with serpentine system. Aftermarket pulley can be purchased and may be able to adjust spacing by flipping the pulley on the hub. Custom Griptec hub with LSA spacing coming soon.
  
• Electronics to control the supercharger bpv. Options below
  
  • Standalone Hellcat Smoothboost controller
    
  • Standalone ECU with PWM output connected to a solid state relay (SSR-60 DD)
    
• Wiring to connect the TMAP sensors
  
  • Connector Housing: TE Connectivity 2050052-1
  • Connector Pins: 4x TE Connectivity 1-968849-1
    
  • Connector Wire Seal: 4x TE Connectivity 828904-1
• Wiring to connect the Throttlebody
  
  • Connector Housing: TE Connectivity 1-1419168-1
  • Connector Pins: 6x TE Connectivity 1924782-1
• Tuning for TMAP sensor, Injectors, Throttlebody, Boost, VE, Timing, etc.
  
  • 2018+ 3 Bar TMAP Sensor Parameters
    • Linear: 309.25 kPa per 5 volts
    • Offset: 0.62 kPa at 0 volts
  • 2015-2017 2 Bar TMAP sensor parameters
    • Linear 227.1 kPa per 5 volts
    • Offset: 2.46 kPa at 0 volts
  • Stock Hellcat Injector Parameters
    • 57 lbs/hr at 4 bar (57 PSI)
    • Dead Time
• Intercooler pump, radiator, lines ,wiring, etc.
• Gen IV engines can have clearance issues with the Oil Pressure Sender. This can be fixed with an M14x1.5 90 degree elbow fitting.
  

There is no guarantee that the supercharger will fit in your vehicle.

6.2 LS3 L99 LSA LS9 L92 L9H L94

6.0 L76 L77 LY6 L96

Currently a Pre-Order. Expected to ship December